תרכובת טריבו - טכנית מתוכננת להגן מפני שחיקה ולשמר את הביצועים של מנועי שתי פעימות של אופנועים, קטנועים, טרקטורונים , מנועי סירות, מנועים בעלי מערכת שימון נפרדת ,מסורים חשמליים וציוד אחר'.
“Mototec 2” tribotechnical compound
Part number 121014
Tribotechnical compound MOTOTEC 2
produced by ATOMIUM is designed to restore the performance and protect against wear
the two-stroke engines of mopeds, all-terrain vehicles (quad bikes) and other motor vehicles, including engines with separate lubrication system.
Full engine treatment
is performed as follows:
To maintain the performance
of the engine is recommended subsequent treatment after 30-40 hours of engine operation.
Compound “MOTOTEK 2” is added to the working oil of the engine by the following procedure:
1. Warm up the engine to operating temperature.
2. Stop the engine.
3. Shake the can thoroughly until natural sediments (active components) are totally dissolved.
4. Add the compound in the engine through its regular oil filling neck.
5. Apply the half can only – if engine has separate lubrication system. Apply the compound at the rate of 5 ml of compound per 1 liter of oil – if engine has common lubrication system.
6. Start the engine and take a trip lasting 15-20 minutes in normal driving mode at once after the procedure.
Effects of application:
•Decreases fuel consumption
•Decreases oil consumption
•Decreases vibration and noise level
•Decreases hum in the gearbox
and improves free car run
•Decreases exhaust CO/CH emissions
•Increases the lifetime